All Projects
Step-by-step STEM guides for every skill level
3 projects found for "Servo"
⚡ ElectronicsAdvanced1 hr laser + assembly
Laser-Cut 3S Servo Tester with ESP32-C3 and OLED
Build a battery-powered tester for up to six hobby servos, with an OLED, a rotary knob and a charging socket, all in an engraved plywood case cut from one 300 x 300 mm sheet.
#ESP32#Servo#Laser Cutting
🤖 RoboticsIntermediate2 hrs laser + 3 hrs build
JaxLab GearCar: a Wooden Gear Car You Drive with One Joystick
A remote-control car whose gearbox, wheels, tyres and Ackermann steering are all cut from 2.8 mm plywood. A 27:1 wooden gearbox, an ESP32-C3 and a one-stick wooden remote. For JSS1 to SS3.
#laser cut#gears#ESP32-C3
🤖 RoboticsIntermediate1 hr laser + 2 hrs build + 9 lessons
Onyi: a Four-Servo Walking Robot STEM Kit (no glue, no soldering)
A laser-cut biped robot that walks on four SG90 servos, with an Arduino Nano on a breadboard on its head and nine graded Arduino lessons. Screws and tabs only: no glue and no soldering.
#laser cut#Arduino Nano#SG90