All Projects
Step-by-step STEM guides for every skill level
3 projects found for "remote control"
⚡ ElectronicsIntermediate1.25 hrs laser + 4 hrs build
Pentagon Mood Lamp: Five Colours, an ESP32 and Its Own Remote
A laser-cut pentagon lantern with one colour per side. An ESP32-C3 dims five 12 V COB LEDs through 2N2222 transistors, controlled from a five-button remote you build yourself or from your phone. Cut files, firmware and an assembly guide included.
#ESP32#mood lamp#laser cut
🤖 RoboticsIntermediate2 hrs laser + 3 hrs build
JaxLab GearCar: a Wooden Gear Car You Drive with One Joystick
A remote-control car whose gearbox, wheels, tyres and Ackermann steering are all cut from 2.8 mm plywood. A 27:1 wooden gearbox, an ESP32-C3 and a one-stick wooden remote. For JSS1 to SS3.
#laser cut#gears#ESP32-C3
🧲 PhysicsBeginner1.5 hrs laser + 2 hrs build
HydroArm: a Water-Powered Robot Arm with Syringes
A laser-cut robot arm that runs on water: push four syringes on a control panel and the arm turns, lifts, reaches and grabs. No batteries, motors, wires or screws. For Primary 1 to 6.
#laser cut#hydraulics#syringes